Gaskets / Seals / Small Parts / Hardware

Cone Washer for Land Cruiser & Hilux steering knuckle. Toyota calls this part “dowell, split (for steering knuckle arm)”
42323-60020
Toyota - Japan

Dowel Pin (7mm) - Toyota Front Hub, Rear Full Float Axle
Toyota pn:
90250-07057

Dust Cap, Front Axle Outer Flange (hub cap)
43423-35010

Gasket, Drive Plate/Hub Flange 80 series (multi hole)
43422-60030
43422-60060
Aftermarket

Gasket, dust seal to backing plate - Land Cruiser 40, 50, 60, 70 & 80 series
43436-60011
Toyota - Japan

Gasket, Hub - Electric Locking Hub Body to Bearing Hub 43422-60040
Genuine Toyota - Japan

Gasket, Hub - Hub Body to Bearing Hub (multi hole)- Toyota Land Cruiser 80 Series (each)
Toyota pn:
43422-60060
43422-60030
Toyota - Japan

Gasket, Hub cover - Aisin Locking Hub (star gasket)
43531-60010
aftermarket

Gasket, Hub Cover Outer - Electric Locking Hub
43531-60030
43531-60031

Gasket, Hub/Drive Flange - locking hub to bearing hub - Land Cruiser 40, 50, 60, 70 series (multi hole)
43422-60010
Aftermarket - Taiwan

Gasket, Hub/Drive Flange - locking hub to bearing hub - Land Cruiser 40, 50, 60, 70 series (multi hole)
43422-60010
Toyota - Japan

Gasket, Knuckle Spindle to housing (backing plate) - Land Cruiser 40, 50, 60, 70 series up to 1990
43435-60011
Toyota - Japan

Gasket, spindle to knuckle housing - Land Cruiser 80 & Late 70 Series (Octagonal)
Toyota pn:
43435-60020

Heavy Duty Knuckle Ball Wiper Seal & Backing Plates

Lock Washer/Tab, Axle Hub (star washer) - Land Cruiser All Models from 1976-on
Toyota pn:
90215-42025

For front and rear locking hubs, drive plates, and rear full floating axle shafts that use 8.0mm hub studs. Hub Stud Kit:
1x 8x1.25mm Stud
1x 8x1.25mm Nut
1x 8mm Lock Washer
1x Cone Washer

Toyota pn: 90116-08325
Made in Japan by Joint Fuji

This kit replaces the two 54mm nuts, the thrust washer, and the locking tab (aka: ‘star washer’) on Toyota Live Front Axles.
Kit Contents:
1x 90215-42025  “Star” lock Washer
1x 90214-42030  Thrust “Claw” Washer
2x 43521-60011  54mm Spindle Nuts

Nut for Steering Knuckle Stud, drun brake backing plate & other high strength applications. Land Cruiser, Hilux & others M12x1.25
94115-71200 plated
Toyota - Japan

Nut, Lock Washer Based (stover) - M8x1.25mm - for Turbo Oil Supply & Drain
Toyota:
94180-40800
Toyota - Japan

Rear Hub Wheel Bearing Seal / Service kit - Land Cruiser HD 70 & 80 Series Full Floating axle/rear end, 1990-on disc brakes
90311-62002
90310-35001
42419-60011
43422-60040

Screw, Bearing Adjustment Nut Retainer Lock Screw - Land Cruiser FF Rear Axle
42419-60011
Toyota - Japan

Axle Seal (Wheel Bearing) - SEMI-floater rear - Land Cruiser 40, 60, 70, 80 series
Toyota pn:
90311-47001

Seal, Front Inner Axle - Hilux & Land Cruiser 40, 50, 60, 70 Series up to 1989 (33x44x8mm)
Toyota pn:
90311-33085

Inner Axle Seal for Land Cruisers with the 8” high pinion front axle. 35x50x9.5mm
90310-35010
90310-35005
Toyota - Japan