40 Series - BJ40, BJ42, BJ43

Turbo System - Toyota 3B engine for BJ42, BJ60, BJ70 series Land Cruiser
Denco Diesel - Australia

12V 80A Alternator Land Cruiser B, 2H/12HT series engines as found in the BJ70, HJ45, HJ60, HJ61
Internally regulated
27040-68020

Pre-combustion chamber to suit Toyota 3B engines. 310 Stainless steel pre-combustion chambers
Replaces Toyota pn:
11106-58010
11106-58020

EDIC Relay Assy, Fuel Control - 12V - Land Cruiser
New Old Stock
Toyota pn: 28590-56090

Toyota 3B & 13BT Full Engine Gasket Kit up to 07/1988
04111-58011
04111-58012
04111-58013
04111-58050
* see product notes *

Head Gasket - Toyota 3B, 13B, 13BT Multi-Layer Steel type (MLS) for Sleeved Engines
Toyota pn:
11115-58110
Toyota - Japan

Air Filter, Land Cruiser - Diesel models 40, 60, 70 & 80 series
17801-68020
17801-68030
Wix Filter

24V Oil Pressure Sender (gauge) - Land Cruiser BJ42 (3B), HJ60 (2H), HJ61 (12HT), HZJ73 (1HZ), HZJ77, PZJ7x (1PZ) & others
83520-60020
Toyota - Japan

AC System Valve Core & Cap Kit - valve & cap kit for Japanese AC systems
R12 & R134a JRA Valves

Locking Hub, Aisin - Hilux & Land Cruiser 40, 50, 60, 70 Series
43530-69055

24V 40A Land Cruiser Alternator for Toyota Land Cruiser
Externally Regulated - to suit 2H and 12HT engines, can be made to fit 3B and 13BT

HZJ / Large Case Denso OSGR Starter Contacts Kit
28226-HZJ-Kit
Kit Contents: 28226-54320 + 28226-54220
Toyota (Denso) - Japan

Cone Washer, 8mm for front & rear hub studs. Land Cruiser, Hilux etc. Toyota pn:
42323-60010

Toyota - Japan

8708.29

3B Engine Rebuild Kit - 1981-07/1988
Suits liner type engines up to 07/1988 with either 3 or 5 bearing cams
Custom bearing size selections available

Clutch kit for Toyota 3B engines as found in BJ42, BJ60, BJ70 & other applications.
This is a 5 piece kit includes the centering tool and pilot bearing .
Exedy Clutch - Japan

Thermostat - Toyota 3B, 13BT, 2H, 12HT 88C/190F
90916-03103
90916-03080
Toyota - Japan

Switch for Transfer Case, Back-up lights, 4WD Shift, Locker engagement
Toyota pn:
84222-12010
Aftermarket part

Front Brake Rotor - Land Cruiser 40, 60, 70 Series 1981-1996
43512-60040
43512-60041
43512-69015
43512-69016
43512-60100

For front and rear locking hubs, drive plates, and rear full floating axle shafts that use 8.0mm hub studs. Hub Stud Kit:
1x 8x1.25mm Stud
1x 8x1.25mm Nut
1x 8mm Lock Washer
1x Cone Washer

Toyota pn: 90116-08325
Made in Japan by Joint Fuji

Gasket, Thermostat / Water outlet - B, 2B, 3B, 13BT
16341-56020
16341-56021
Toyota - Japan

Steering Knuckle Stud - “hexalobular” (=has 6 point male torx at the top for tightening into place).
90126-12010 (current pn)
90126-12005
90116-12007
Toyota - Japan

Head Gasket, Toyota 3B, 13B and 13BT engines - Composite Type
Part Number:
11115-58010
11115-58040

Intake manifold Gasket - 3B, 13BT - Composite intake gasket (not paper)
17171-56010
Toyota - Japan

Gasket & Seal Kit, Transmission & Transfer Case
Land Cruiser FJ40, BJ40, FJ45 4 Speed 08/1980-10/1984 (w/split case)
008-000824