70 Series - BJ70, BJ71, BJ73, BJ74, BJ75 (up to 1989)

Turbo System - Toyota 3B engine for BJ42, BJ60, BJ70 series Land Cruiser
Denco Diesel - Australia

Glow Plug - 20.5V plug - Toyota Land Cruiser HJ60 2H & BJ42, BJ70 3B w/24V Manual Glow system
19850-68040
NGK - Japan

Locking Hub, Aisin - Hilux & Land Cruiser 40, 50, 60, 70 Series
43530-69055

Fits: BJ60, BJ61, BJ70, BJ71, BJ73, BJ74 with the self-adjusting clutch slave.
31470-60120 (11/1984-09/1985)
31470-60130 (10/1985-06/1987)
Made in Japan

Rear Main Seal - B, 2B, 3B, 13BT, 2H, 12HT (95x115x12)
90311-95001
90311-95002

DT-SH4 Swivel Hub/Knuckle Kit
Fits all Land Cruiser models from 1981 to 1989 with Non-High Pinion front end.
Fits Toyota 4WD mini-truck w/solid front axle & Hilux LN106 solid front axle pick up trucks.

Brake Shoes, Rear - Land Cruiser 40, 60, 70 & 80 Series
04495-60010
04495-60011
04495-60030
04495-60060
04495-60070
04495-34020
Japan

6V Glow Plug for 12V Land Cruisers running SuperGlow for North American spec models
19850-68050
19850-68051
PT146
HKT - Japan

Gasket, dust seal to backing plate - Land Cruiser 40, 50, 60, 70 & 80 series
43436-60011
Toyota - Japan

Bush No.1, Gear Shifter Seat, Nylon cup - Land Cruiser 5 Speed H55F
33548-60020
Toyota - Japan

Head Gasket - Toyota 3B, 13B, 13BT Multi-Layer Steel type (MLS) Linered/Sleeved Engines
High Quality Aftermarket
Toyota pn:
11115-58110

Wire, Parking Brake - Land Cruiser 08/1980-1999 with self adjusting drum brake
Toyota pn:
47616-60010

Thermostat - Toyota 3B, 13BT, 2H, 12HT 88C/190F
90916-03103
90916-03080
Toyota - Japan

Gasket, Hub/Drive Flange - locking hub to bearing hub - Land Cruiser 40, 50, 60, 70 series (multi hole)
43422-60010
Toyota - Japan

EDIC Relay Assy, Fuel Control - 12V - Land Cruiser
New Old Stock
Toyota pn: 28590-56090

13BT Injector Washer/Seal Kit (for 4 injectors)
11176-56020
90201-08106
90430-17003
Toyota - Japan

Tie Rod End LH/RH - 60, 70, 80 Series - 23mm RH thread
**Read the product description for applications
Toyota pn: 45047-69085
Sankei 555 - Japan

24V Front Heater Blower Resistor - Land Cruiser 70 Series
87138-90K01
Toyota / Denso - Japan

Front Brake Rotor - Land Cruiser 40, 60, 70 Series 1981-1996
Toyota pn:
43512-60040
43512-60041
43512-69015
43512-69016
43512-60100

Cone Washer, 8mm for front & rear hub studs. Land Cruiser, Hilux etc. Toyota pn:
42323-60010

Toyota - Japan

8708.29

3B Engine Rebuild Kit - 1981-07/1988
Suits liner type engines up to 07/1988 with either 3 or 5 bearing cams
Custom bearing size selections available

For front and rear locking hubs, drive plates, and rear full floating axle shafts that use 8.0mm hub studs. Hub Stud Kit:
1x 8x1.25mm Stud
1x 8x1.25mm Nut
1x 8mm Lock Washer
1x Cone Washer

Toyota pn: 90116-08325
Made in Japan by Joint Fuji

Gasket, Knuckle Spindle to housing (backing plate) - Land Cruiser 40, 50, 60, 70 series up to 1990
43435-60011
Toyota - Japan

These are the correct Koyo knuckle (aka trunion or king pin) bearings for your pre-1990 Toyota solid axle vehicle. Toyota part number:
90366-17001
90366-17007
90366-17001-77
Koyo - Japan