80 Series - HDJ80, HDJ81, HZJ80, HZJ81 FJ80, FZJ80

Timing Belt - Land Cruiser 1PZ (all), 1HZ (1990-04/1998), 1HDT (all)
13568-19065
13568-17010
94Tx25mm

Bearing, 8" HP Diff Carrier - Toyota Land Cruiser high pinion 8” E-Locker RH side
Toyota pn:
90366-75001

Tie Rod End LH/RH - 60, 70, 80 Series - 23mm RH thread
**Read the product description for applications
Toyota pn: 45047-69085
Sankei 555 - Japan

Left & Right Front Outer - Land Cruiser 80 - with front ABS Brakes
Toyota pn:
90947-02714
90947-02A16
Note: Does not fit non-ABS vehicles
Aftermarket

Brake Hose, Front Outer - RIGHT - Land Cruiser 80 series non-ABS - 12.5"
90947-02613
Toyota - Japan

Brake Hose, Left Rear - Land Cruiser HDJ81, FZJ80, HZJ73, HZJ77 (disc brakes)
90947-02615
Toyota - Japan

Brake Hose, Right Rear - Land Cruiser HDJ81, FZJ80, HZJ73, HZJ77 (disc brakes)
90947-02614
Toyota - Japan

Brake Pads, Rear - Land Cruiser LJ71, LJ78, KZJ78, HZJ73, PZJ77, HZJ77, 70 & 80 series (1990-on)
Toyota pn:
04492-60020
04466-60090

Differential Carrier Bearing, Toyota Land Cruiser - 50mm id for use with ARB Air Lockers in 9.5” diffs
Koyo - Japan

U-Joint, Toyota - Hilux - KZN, LN10x all positions & HDJ81, Land Cruiser 80 Series Front
04371-60070
04371-35031
GMB - Japan

NLA - Pipe Assy, Turbo Oil Inlet - Toyota HDJ80, HDJ81 - 1HDT engine.
15407-17013
(15407-17011)
Toyota - Japan

Nut for Steering Knuckle Stud, drun brake backing plate & other high strength applications. Land Cruiser, Hilux & others M12x1.25
94115-71200 plated
Toyota - Japan

Fuel Filter water level sensor (switch) for diesel Toyota vehiclesToyota pn:
84461-60040
Toyota - Japan

Rear Lateral Control Arm/Panhard Rod Bushing - Upper & Lower - Land Cruiser 80 Series (2 req)
Toyota pn:
48706-60040
Toyota - Japan

Universal Joint - Land Cruiser 40, 55, 60, 70 & 80 Series - 64mm u-joint used from 1974 & up.
04371-36030
04371-60210
GMB - Japan

Snap Ring/Circlip, Inner - axle shaft into birfield - Land Cruiser 80 SeriesToyota pn:
90521-34001
90521-34005

Toyota - Japan

Updated Spindle Bushing for the Land Cruiser 80 & 100 series, and late 70 series (09/1999-on) with solid axle.
Toyota pn: 90381-35001
Use with bearing part number 90364-33011
1 short bushing and 1 bearing required per side

Dowel Pin (7mm) - Toyota Front Hub, Rear Full Float Axle
Toyota pn:
90250-07057

This is the rubber (Viton) o-ring that sits under the Exhaust Manifold Sealing rings (steel) that prevent the rear manifold from leaking.
2 pieces required
96732-24042

Taiho Rod Bearings for the Toyota 1PZ, 1HZ, 1HDT & 1HDFT - Standard Size
13041-17010 Std.
Taiho - Japan