Spindle Bushing - Land Cruiser & Hilux solid axle 90999-70067, 90381-33002

Home / Spindle Bushing - Land Cruiser & Hilux solid axle 90999-70067, 90381-33002

Information

Article number:	90999-70067
Availability:	In stock (8)

Spindle Bushings for Land Cruiser & Hilux with the solid front axle and Part-Time 4WD

1 bushing required per spindle.

Best for use on vehicles that are part-time 4WD (ie: you have locking hubs)

• Some honing may be required after installation.
• Lubricate with moly grease when servicing your knuckles.

Worn spindle bushings can cause a hard to locate and 'tricky to put your finger on it' rumble or vibration at moderate and higher road speeds.

Note: For vehicles with Full-Time 4WD you have two choices - you can use this product -or- the updated spindle bushing design that uses a shorter bushing in combination with a needle bearing which together provides improved performance.

If you’re using your 4WD most of the time, or you have a Land Cruiser that has Full-Time 4WD such as the 80 Series, then the newer two-piece design is the better choice - the part numbers are: 081-131658 needle bearing (90364-33011) and 041-131955 for the short brass bush (90381-35001)

Part numbers:
90381-33002
90999-70067

Toyota - Japan

More detailed vehicle fit list:
Bundera LJ70 RJ70 11/84-7/92
Hilux LN46 LN65 LN106 RN36 RN46 RN105 YN65 YN67 1/79-7/97
Landcruiser BJ40 BJ42 FJ40 FJ45 FJ55 HJ45 HJ47 9/75-10/84
Landcruiser FJ60 FJ62 HJ60 HJ61 8/80-12/89 Landcruiser BJ70 BJ73 BJ74 FJ70 FJ73 FJ75 FZJ70 FZJ75 HJ75 HZJ70 HZJ73 HZJ75 PZJ70 PZJ73 9/75-7/99
Land Cruiser FJ80 FZJ80 HDJ80 HZJ80 1/90-12/97 standard models without full-time 4wd
4Runner LN60 YN60 3/84-7/85 Replacement for 90381-33002

NOTE - Landcruiser FJ80 FZJ80 HDJ80 HDJ81 HZJ80 HZJ81 full-time 4wd models 1/90- fitted with either 90381-33002 or 90381-33001 solid brass inner spindle bush should upgrade to 90364-33011 needle bearing with 90381-35001 thrust bush as the replacement for smoother / quieter operation